Filter
Top Products
e-STUDIO3511/4511 OUTLINE OF THE MACHINE 2 - 42 November 2003 © TOSHIBA TEC
2
Fig. 2-568
(3) Remove 2 screws and take off the cover on
the rear side.
Fig. 2-566
Fig. 2-567
Fig. 2-565
(5) Remove 2 screws.
(6) Lift up the finisher and take it off.
<When PFP/LCF is installed>
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.