Filter
Top Products
November 2003 © TOSHIBA TEC 12 - 17 e-STUDIO3511/4511 DEVELOPER UNIT
12
(4) Pour the developer material.
Note: When installing the upper cover, make sure
the urethan seal is covered by the upper
cover.
(A-3) Auto-toner sensor
(1) Discharge the developer material ( Chapter
12.8 (A-2)).
(2) Disconnect 1 connector, remove 1 screw and
take off the auto-toner sensor.
(A-4) Doctor blade
(1) Discharge the developer material ( Chapter
12.8 (A-2)).
(2) Remove 2 screws and take off the right cover.
Urethan seal
Auto-toner sensor
Right cover
Fig. 12-805
Fig. 12-806
Fig. 12-807
Fig. 12-808
Upper cover