Filter
Top Products
e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 14 November 2003 © TOSHIBA TEC
10
(A-6) Bypass paper sensor
(1) Disconnect 1 connector. Then release the
latches and take off the bypass paper sensor.
(2) Remove 1 clip and pull out the shaft in the
direction of the white arrow. Then take off the
bypass pickup roller.
(A-5) Bypass pickup solenoid
(1) Remove 4 screws and take off the plate cover
by lifting and sliding it to the direction of the
white arrow.
Clip
Bypass pickup roller
Fig. 10-413
Fig. 10-414
(2) Disconnect 1 connector and remove 1 spring.
Then take off the bypass pickup solenoid.
Plate spring
Plate cover
Fig. 10-415
Fig. 10-416
Bypass pickup solenoid
Connector
Spring
Bypass paper sensor