Filter
Top Products
November 2003 © TOSHIBA TEC 2 - 41 e-STUDIO3511/4511 OUTLINE OF THE MACHINE
2
Fig. 2-561
Fig. 2-562
(8) Lift up the equipment and take off the LCF.
[D] MJ-1022 (Hanging finisher)
<When PFP/LCF is not installed>
(1) Turn OFF the power and unplug the power
cable.
(2) Take off the connector cover and disconnect
the connector.
Fig. 2-563
(3) Remove 2 screws and take off the safety
bracket on the rear side and the cover.
Fig. 2-564
(4) Remove 2 screws and take off the safety
bracket on the front side and the cover.