Filter
Top Products
e-STUDIO3511/4511 OUTLINE OF THE MACHINE 2 - 38 November 2003 © TOSHIBA TEC
2
(5) Take off the lower drawer of the equipment and
PFP upper drawer.
Fig. 2-552
Fig. 2-550
Fig. 2-551
Fig. 2-549
(3) Remove 1 screw and the ground wire, and then
disconnect 2 connectors (3 if the optional damp
heater is installed).
[B] KD-1011 (Paper Feed Pedestal (PFP))
(1) Turn OFF the power and unplug the power
cable.
(2) Remove 7 screws and take off the rear cover
of the equipment.
Note: Disconnect the connector of the RADF first
when the RADF is installed.
(4) Remove 2 screws and take off 2 fixing brackets
on the rear side.
Connector of optional
damp heater