Filter
Top Products
e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 16 November 2003 © TOSHIBA TEC
10
(2) Disconnect 1 connector. Then release the
latches and take off the bypass feed sensor.
Fig. 10-422
Fig. 10-423
Lower plate cover
Bypass feed sensor
Fig. 10-424
Stay
(3) Remove the arbor, shaft and spring.
Fig. 10-421
Arbor
Shaft
Spring
Bypass separation roller
[B] Lower drawer feed sensor/Side cover
opening/closing switch
(1) Take off the bypass unit ( Chapter 10.4 [A]).
(2) Take off the ADU ( Chapter 17.5 [A]).
(3) Take off the 2nd transfer unit ( Chapter 14.7
[K]).
(4) Remove 5 screws and take off the stay.
(A-9) Bypass feed sensor
(1) Remove 3 screws and take the lower plate
cover.