Filter
Top Products
November 2003 © TOSHIBA TEC 14 - 15 e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT
14
Fig. 14-733
Fig. 14-734
(4) Remove the harness clamp. Remove 1 screw
and take off the transfer belt cleaner auger
motor with the whole bracket.
(5) Remove 2 screws and take off the transfer belt
cleaner auger motor from the bracket.
Harness clamp
Transfer belt cleaner
auger motor
Fig. 14-735
Fig. 14-736
(6) Remove 1 clip and take off 1 bushing. Then
take off the assembly of the shaft and clutch.
(7) Remove 1 clip. Remove 1 E-ring and take off
the bushing-1, and then take off the bushing-
2 with the shaft. Take off the transfer belt
cleaner clutch.
Shaft
Clutch
Bushing-2
Transfer belt
cleaner clutch
Bushing-1
E-ring
Clip
04/10