Filter
Top Products
e-STUDIO3511/4511 REVOLVER UNIT 13 - 12 November 2003 © TOSHIBA TEC
13
Fig. 13-718
Stay
Fig. 13-717
Lock lever
Fig. 13-716
(12) Remove 2 screws and take off the laser cooling
duct cover (front side).
(13) Take off the developer motor drive unit (
Chapter 9.5 [A]).
(14) Remove 1 screw and take off the lock lever.
(15) Remove 5 screws and the stay. (Remove 1 of
5 screws from the rear side of the equipment.)