Filter
Top Products
16
e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 22 November 2003 © TOSHIBA TEC
Fig. 16-728
Fig. 16-727
Separation finger unit
Separation finger
Fig. 16-726
Spring
(4) Remove 2 springs.
(5) Remove 2 screws and take off the separation
finger unit.
(6) Remove the spring of each separation finger.
Spring
Fig. 16-725
(3) Confirm that the pressure releasing levers on
both sides are up. Then loosen each 1 screw
on both front and rear sides.
- Front side -
- Rear side -