Barco 26-0313000-00 Projector User Manual


 
128 Encore Presentation System • User’s Guide • Rev 04
4. Controller Orientation
Controller Sections
i~óÉê=`çåíêçä=pÉÅíáçå
The figures below illustrate the Layer Control Section on each Controller.
Figure 4-15. Layer Control Section, Controller SC
Figure 4-16. Layer Control Section, Controller LC
The buttons in the Layer Control Section enable you to select (on Preview) the sources
that will transition to or from
Program — including backgrounds, layers and the DSK. When
you select a blue “layer” button, you are electronically selecting a scaler that you want to
assign as a PIP or Key, or modify in some manner. In this way, you control the overall look
on Preview before you transition that look to Program.
Please note the following points:
The Controller LC can control up to 12 layers on six mixers in a “stack”
configuration.
Using the Shift Layers button in the Layer Functions Section, the Controller
SC
can also control up to 12 layers on six mixers in a “stack” configuration. Refer
to the “
Layer Functions Section” heading on page 131 for details
Two background sources and one DSK are provided.
Each identical mixer is comprised of two layers (A and B) and a Split button.
The buttons are arranged left-to-right in order of visual priority — backgrounds
(lowest priority),
mixers (in order of priority), and the DSK (highest priority).
Any combination of backgrounds, layers and DSK can be selected on Preview for
transition to or from Program, provided that resources are available. In Chapter 7,
refer to the “
A Word About Resources” section on page 345 for more details.
2
A
2
B
3
A
3
B
BG
A
BG
B
1
A
1
B
DSK
Split SplitSplit
Program
Layer
Background Mixer 1 Mixer 2 Mixer 3
2
A
2
B
3
A
3
B
4
A
4
B
5
A
5
B
BG
A
BG
B
1
A
1
B
6
A
6
B
DSK
Split Split Split Split SplitSplit
Program
Layer
Background Mixer 1 Mixer 2 Mixer 3 Mixer 4 Mixer 5 Mixer 6