Barco 26-0313000-00 Projector User Manual


 
230 Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
Key Menu
V Position — indicates the Key’s position, relative to the vertical center of the
screen (
00), as measured from the exact center of the Key. Thus, the value 64 is
64 pixels above center. To adjust, move the Joystick up and down.
Move Rate — adjusts the rate (in 0.1 second increments) for programmed Key
movement, from keyframe to keyframe. To adjust, select the
RATE radio button
and twist the Joystick Z-Axis knob.
Key Frame Effect — indicates the “motion type” that is used to move the Key
from point to point.
~ If no move is programmed, the display reads [N/A].
~ If a move is programmed, the motion type is shown (e.g., [Linear]). The
motion type is selected on the
Effects Menu.
Press {STATS} to display the Status Menu. Refer to the “Status Menu” section
on page 212 for details.
Press {KEY} to display the Key Menu. Refer to the “Key Menu Description
section on page 225 for details.
Press {MATTE} to display the Matte Menu. Refer to the “Matte Menu” section on
page 228 for details.
Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects
Menu” section on page 220 for details.
Key Joystick Functions
At the bottom of the Key Adjustment Menu, four radio buttons enable the Joystick to be
assigned to various Key adjustment functions.
Press {TRACK} to lock H Size and V Size together. Regardless of the Key’s
current aspect ratio, its size adjusts proportionally when the Joystick’s Z-Axis knob
or the
SIZE rotary knob is used to change size.
Press {H SIZE} to adjust only the horizontal size, leaving the vertical size alone.
In this way, you can stretch the Key horizontally.
Press {V SIZE} to adjust only the vertical size, leaving the horizontal size as is. In
this way, you can stretch the Key vertically.
Press {RATE} to adjust the move rate of the Key, from keyframe to keyframe.
Please note the following additional related functions:
To return the Key to its default size and aspect ratio, press the RESET button in
the
Joystick Section.
To adjust the Key with fine resolution, press the FINE ADJUST button in the
Joystick Section.