Filter
Top Products
Encore Presentation System • User’s Guide • Rev 04 215
5. Menu Orientation
PIP Adjustment Menu
• Move Rate — adjusts the rate (in 0.1 second increments) for programmed PIP
“moves” from keyframe to keyframe. To adjust, select the
RATE radio button and
twist the Joystick Z-Axis knob.
• Key Frame Effect — indicates the “motion type” that is used to move the PIP
from point to point.
~ If no move is programmed, the display reads [N/A].
~ If a move is programmed, the motion type is shown (e.g., [Linear]). The
motion type is selected on the
Effects Menu.
• Press {CLONE} to display the Clone Setup Menu (if the Clone button is
enabled). Refer to the “
Clone Setup Menu” section on page 216 for details.
• Press {BORDR} to display the Border Menu. Refer to the “Border Menu”
section on page 218 for details.
• Press {SHDOW} to display the Shadow Menu. Refer to the “Shadow Menu”
section on page 219 for details.
• Press {EFX} to display the Image Effects Menu. Refer to the “Image Effects
Menu” section on page 220 for details.
• Press Source in the Joystick Section to display the Input Source Adjustment
Menu
. Refer to the “Source Adjustment Menus” section on page 232.
mfm=gçóëíáÅâ=cìåÅíáçåë
At the bottom of the PIP Adjustment Menu, four radio buttons enable the Joystick to be
assigned to various PIP adjustment functions.
• Press {TRACK} to lock H Size and V Size together. Regardless of the PIP’s
current aspect ratio, its size will adjust proportionally when the Joystick’s Z-Axis
knob or the
SIZE rotary knob is used to change size.
• Press {H SIZE} to adjust only the horizontal size, leaving the vertical size alone.
In this way, you can stretch the PIP horizontally.
• Press {V SIZE} to adjust only the vertical size, leaving the horizontal size as is. In
this way, you can stretch the PIP vertically.
• Press {RATE} to adjust the move rate of the PIP, from keyframe to keyframe.
Please note the following additional related functions:
• To return the PIP to its default size and aspect ratio, press the Reset button in the
Joystick Section.
• To adjust the PIP with fine resolution, press the Fine Adjust button in the
Joystick Section.
mfm=^ÇàìëíãÉåí=pìÄ=jÉåìë
The following sub menus can be accessed from the PIP Adjustment Menu:
• Clone Setup Menu
• Border Menu
• Shadow Menu
• Image Effects Menu
Complete descriptions are provided in the following sections.