Filter
Top Products
184 Encore Presentation System • User’s Guide • Rev 04
5. Menu Orientation
System Menu
• Press {REMOVE} to remove the selected VP, VPx or ScreenPRO-II (on the VP
[SP] to Remove
line) from the current destination configuration.
• Press {REMOVE ALL} to remove all units from the current destination.
Aux Setup Menu
From the Destination Setup Menu, select an Aux destination type, then press {AUX
SETUP}
to display the Aux Setup Menu. Please note:
• The {AUX SETUP} button appears when an Aux, ImagePRO Aux or PrePRO-II
Aux
destination is selected on the Destination Setup Menu.
• The Aux Setup Menu changes, depending upon the selected type of destination.
• In Chapter 1, refer to the “A Word About Destinations” section on page 27 for
examples of each Aux destination “type.”
When a standard
Aux destination “type” is selected on the Destination Setup Menu, the
Aux Setup Menu appears in this form:
Figure 5-32. Aux Setup Menu — Aux Destination (sample)
The following functions are provided:
• Top Line — displays the type of Aux destination and its number.
• Source Mapping — two selections are available:
~ Input Patch — maps Aux sources according to how your inputs are
patched to buttons in the console’s
Source Selection section.
~ Direct Map — maps Aux sources according to how your inputs are
connected to the router.
• Router Name — selects the router from which the Aux sources will be output.
Note
If you have defined a destination as a Wide Screen,
preliminary wide screen setup information will be sent to the
VP and VPx units when you exit this menu.
B
A
C
K
A
D
J
AUX SETUP
Source Mapping Direct Map
Router Name
Router Output
RESET
DEST_2
MATRIXPRO1
7
N
A
V