Filter
Top Products
Encore Presentation System • User’s Guide • Rev 04 169
5. Menu Orientation
Output Menu
• Marker Mode — enables and disables the wide screen markers, to show the
boundaries of active data. In Chapter 7, refer to the “
Wide Screen Markers”
section on page 305 for details.
• Overlap Width — sets the horizontal overlap (in pixels) between projectors. As
you adjust, the
Total H Res value tracks, and wide screen markers adjust.
• Alignment Test Pattern — selects the desired alignment test pattern used for
performing projector lens shift and registration adjustments.
• Data Doubling — enables or disables data doubling. Typically, the function is
only disabled when unscaled background sources are pre-data doubled. In
Chapter 3, refer to the “
Overview of Edge-Blending Technology” section on
page 98 for more information.
• Justification — sets the desired wide screen justification, either Center or Left.
Once set, wide screen markers adjust accordingly.
• Press {TEST PATTERN} to display the Test Pattern Menu. Refer to the “Test
Pattern Menu” section on page 166 for details.
• Press {FEATHER SETUP} to display the Feather Setup Menu. Refer to the
“
Feather Setup Menu” section on page 171 for details.
Wide Screen Settings Menu (V Array)
The Wide Screen Settings Menu (V Array) provides tools for wide screen setup and
adjustment for arrays of destinations that include any vertical blending element.
Figure 5-20. Sample Wide Screen Settings Menu (V Array)
The following functions are provided:
• Total Projectors — indicates the total number of Processors in the array, and
provides the array’s dimensions (e.g.,
2W x 2H, 1W x 2H). This field is for
information only.
Note
Markers apply to horizontal blends (e.g., 3W x 1H), and to
horizontal + vertical arrays (e.g.,
2W x 2H), but do not apply to
vertical blends (e.g.,
1W x 3H).
Total V Res
V Overlap
Total H Res
Alignment Test Pattern
Background Format
1848
1336
Off
[ Overlapped ]
B
A
C
K
N
A
V
A
D
J
WIDE SCREEN SETTINGS
Total Projectors [ 2W x 2H ]
200
H Overlap 200
FEATHER
SETUP