Filter
Top Products
Encore Presentation System • User’s Guide • Rev 04 35
NK==fåíêçÇìÅíáçå
New Feature Review
kÉï=cÉ~íìêÉ=oÉîáÉï
This section lists the new features that have been implemented in recent versions of
Encore software. Reference links are provided.
• Software Version 1.24 Features
• Software Version 1.22 Features
• Software Version 1.19 Features
pçÑíï~êÉ=sÉêëáçå=NKOQ=cÉ~íìêÉë
The following new features have been implemented in software version 1.24.
• Stacked Configuration Support
Stacked configuration support has been added to the Encore Controller SC.
~ In Chapter 3, refer to the “Single Screen Stack Configuration” section
on page 80 for instructions on installing single screen stack
configurations, and the “
Wide Screen Stack Configuration” section on
page 84 for instructions on wide screen stack configurations.
~ In Chapter 6, refer to the “Standard and Stack Destination Setup”
section on page 277 for stack setup instructions.
• Feature Enhancements
The following feature and interface enhancements are provided in the version:
~ ImagePRO AUX transitions are now smooth when switching between
any inputs routed to an ImagePRO. This feature requires ImagePRO
software 2.43 or higher.
~ For analog NTSC and PAL inputs, the default sync slice is now 80mV.
This change improves the system’s ability to maintain a stable lock to
video sources where signal integrity is less than ideal.
~ Support has been added for Grass Valley native protocol.
~ Programmable DVI output sync polarity adjustments have been added.
In Chapter 5, refer to the “
Settings Menu” section on page 165.
~ The following input and output resolutions have been added:
• 1280x720 @60
• 1280x720 II @60
• 1280x800 @60
• 1280x800 II @60
• 1360x768 @60
• 1440x900 @60, @75, @85
• 1680x1050 @60
• 1920x1080pSF @29.97, @30
• 1920x1200 @50, @59.94, @60
• 2048x1200 @59.94
In Appendix A, refer to the “
Input and Output Resolutions” section on
page 375 for a complete list of all input and output resolutions.