Barco 26-0313000-00 Projector User Manual


 
Encore Presentation System • User’s Guide • Rev 04 273
6. System Setup
Router Setup
e. Repeat step 19 to designate additional Aux outputs.
20. Press {BACK} to return to the Router Specification Menu.
21. Repeat from step 6 for the next router that you wish to assign.
22. When you have configured all of your system’s routers, on the Router
Specification Menu
, scroll to the Number line, and scan through the remaining
router numbers. Other than the ones which you just assigned, if there are
any
router numbers that do not say
<EMPTY> on the Number line, press {DELETE
ROUTER}
to remove the specification from the system.
23. In the System Keypad, press SAVE to save the current configuration.
Note
When you press the SAVE button, router specifications will be
saved only if changes have not previously been written to
Flash memory.