Barco 26-0313000-00 Projector User Manual


 
90 Encore Presentation System • User’s Guide • Rev 04
3. Hardware Installation
Connection Charts
`Ü~êí=fåëíêìÅíáçåë
Following are instructions for using the connection charts:
Router I/O Charts
Complete one chart for each video router in your system (up to the maximum 8).
~ Column 1: list the sources that are connected to the router inputs.
~ Column 2: list the Encore button(s) to which the source will be patched.
~ Column 4: list where each router output will be connected.
Direct Encore Input Chart
Complete the chart for any sources that will be connected directly to Encore.
~ Column 1: list the direct connection source name.
~ Column 2: list the Encore button(s) to which the source will be patched.
~ Column 3: list the VP or VPx to which the source is connected.
~ Column 4: list the specific M/E input (and format) to which the source is
connected: DVI, HD-SDI or Analog.
Encore Destination Chart
Complete the chart for all Encore destinations.
~ Column 1: list the VP(s) or VPx(s) that comprise the destination.
~ Column 2: list the Encore destination assignment.
~ Column 3: list the screen to which the destination is routed.
~ Column 4: list any notes as necessary.
Note
The router charts can also be used for D/A connections.