Barco 26-0313000-00 Projector User Manual


 
Encore Presentation System • User’s Guide • Rev 04 353
7. Operations
Using Backup and Restore
rëáåÖ=_~Åâìé=~åÇ=oÉëíçêÉ
The Encore system enables you to backup and restore all (or a portion) of the complete
system configuration setup using a customer supplied flash memory card. The following
topics are discussed:
System Backup
System Restore
póëíÉã=_~Åâìé
This procedure enables you to back up all (or a portion) of the entire Encore system
configuration. Please note the following important points:
You can only store one system configuration on a Flash Memory Card.
Customer supplied Flash Memory Cards must be equal to or greater than 512MB.
Use the following steps to back up your system:
1. Ensure that you have a (customer supplied) Flash Memory Card available.
2. Insert the Flash Memory Card into the Controller’s rear panel Memory Card slot.
3. Press MISC on the Home Menu, or press MISC in the System Keypad.
4. Press {BACKUP RESTORE} to display the Backup/Restore Menu.
5. On the Device line, select the combination of devices you want to back up:
~ Ctrlr — backs up the Controller only.
~ VP+SP — backs up the Video Processors and ScreenPRO-IIs only.
~ Ctrlr+VP+SP — backs up the Controller, the Video Processors and any
ScreenPRO-IIs.
6. On the Controller Options line, select which portion of the selected devices you
want to back up. Choose between
All, System or Presets.
7. Press {CHECK CARD} to display the Current Backup Menu.
~ Check the “Controller files backed up” section to confirm the types of
files present on the Flash Memory Card, if any. (e.g., System, Presets,
ScreenPRO-II). If files are present, determine if you want to overwrite, or
insert a new (blank) card.
~ Press {BACK} to return to the Backup/Restore Menu.
8. Press {BACKUP} to backup your system to the Flash Memory Card using the
selected device(s) and options.