Barco 26-0313000-00 Projector User Manual


 
36 Encore Presentation System • User’s Guide • Rev 04
NK==fåíêçÇìÅíáçå
New Feature Review
pçÑíï~êÉ=sÉêëáçå=NKOO=cÉ~íìêÉë
The following features were implemented in software version 1.22.
Vertical Blending
Vertical Array blending is supported, and all cabling to the VP and VPx is the
same as a standard widescreen setup. In Chapter 6, refer to the “
Vertical Blend
Setup” section on page 278 for instructions.
ScreenPRO-II EOC Support
When a ScreenPRO-II is used as a destination, Encore supports the Enhanced
Output Card (EOC) option of the ScreenPRO-II. This option is a factory installed
card that provides additional output formats, and expands the unit’s still store
capabilities. In Chapter 6, refer to the “
ScreenPRO-II with EOC” section on
page 280 for instructions.
Enhanced ScreenPRO-II Routing
When a ScreenPRO-II is used as a destination, Encore supports the internal and
external routing capability of the ScreenPRO-II. In Chapter 6, refer to the
ScreenPRO-II Destination Setup” section on page 279 for details.
Input Auto Acquire
By default, the Controller attempts to Auto Acquire an input as soon as the source
is selected, provided it does not currently have a saved input config file. In
Chapter 5, refer to the “
User Preference Menu” section on page 204 for details.
Custom Borders
In the Border Menu, the Custom Border Menu enables you to select any pre-
configured border style as a starting point, and then configure a custom border
from a variety of parameters. In Chapter 5, refer to the “
Border Menu” section on
page 218 for details.
Preset Recall Options
From the Home Menu, the Preset Recall Menu enables you to select from a
variety of preset recall options. In Chapter 5, refer to the “
Preset Recall Options
Menu” section on page 208 for details.
Mix, User Effect and User Trans Buttons
In the Transition Functions sections on both controllers, the Mix, User Effect
and
User Trans (1, 2, and 3) buttons have been implemented. In Chapter 4, refer
to the “
Transition Functions Section” heading on page 142 for details.
Patch Next
On the Output Patch Menu, the {PATCH NEXT} soft key enables you to enter
output patch data quickly, provided that the physical output connections to the VP
and VPx units have been performed logically. In Chapter 5, refer to the “
Output
Patch Menu” section on page 194 for details.
Previous Button
In the Preset Section, the Previous button has been implemented. In Chapter 4,
refer to the “
Preset Section” heading on page 123 for details.
New Routers Supported
Routers from FSR, AutoPatch and NVision are supported. In Chapter 5, refer to
the “
Router Specification Menu” section on page 190 for details.