Filter
Top Products
Encore Presentation System • User’s Guide • Rev 04 257
5. Menu Orientation
DSK Menus
aph=fåéìí=pÉíìé=jÉåì
The figure below illustrates a sample DSK Input Setup Menu:
Figure 5-94. DSK Input Setup Menu (sample)
The DSK Input Setup Menu enables you to set up the DSK input. The menu changes
depending on the selected input “type.”
The following three menu functions are shared — regardless of the selected DSK type:
• Destination — displays the currently selected destination.
• ID — displays the ID(s) of the selected destination’s associated Video Processor.
• DSK Input — enables you to select the input connector from which the DSK
source is pulled.
The following function changes the menu parameters:
• Type — selects the desired DSK type:
~ None — the DSK circuitry for a selected Processor (as chosen with the
ID field), is off.
~ DVI — a digital graphic from a computer or other DVI source is the DSK
Source. Refer to the “
Background (and DSK) Menu Functions — DVI
Type” section on page 242.
DSK Input 1B
N
A
V
DSK INPUT SETUP
Destination [ 1 ]
ID ALL
A
D
J
K
E
Y
S
A
V
E
R
E
S
E
T
APPLY
FORMAT
FORCE
ACQUIRE
Type DVI
Format 1280 x 1024 @60
Crop: H Offset 0
V Offset 0
Tip
This selection is recommended when a DSK is only needed
on the last screen in a widescreen configuration (such as a
bug), and when only a single head graphics card is required.
Note
When “DVI” is selected, the available functions are virtually
identical to those on the
BG Input Setup Menu — when
“
DVI” is selected as the background type.