Filter
Top Products
260 Encore Presentation System • User’s Guide • Rev 04
6. System Setup
Setup Prerequisites
pÉíìé=mêÉêÉèìáëáíÉë
Before starting to set up your Encore system, please review the following prerequisites:
• Ensure that you are familiar with all Encore system hardware. Refer to Chapter 2,
“
Hardware Orientation” on page 43 for details.
• Ensure that hardware is properly installed, and that all sources, routers and
peripherals are properly connected. Refer to Chapter 3, “
Hardware Installation”
on page 61 for details.
• Ensure that you are familiar will all parts of the Controller — including the
functions of all buttons within the various sections. Refer to Chapter 4,
“
Controller Orientation” on page 107 for details.
• Ensure that you are familiar will all Encore menus and sub-menus. Refer to
Chapter 5, “
Menu Orientation” on page 145 for details.
• Ensure that your connection charts are complete, and readily available for
reference throughout this chapter. In Chapter 3, refer to the “
Connection Charts”
section on page 89 for details.
Please note:
• In this chapter, when a procedure tells you to “scroll to” a certain line, use the
rotary knob labelled
NAV to move the highlight.
• When a procedure tells you to “adjust” or “select” a certain parameter, use the
ADJ rotary knob.
Figure 6-1. Menu Navigation
1.0
HD-15
YPbPr
[ SMPTE ]
[ 1:1 ]
N
A
V
A
D
J
SRC_1
COLOR
BALANCE
FORCE
ACQUIRE
100.0
100.0