Filter
Top Products
Encore Presentation System • User’s Guide • Rev 04 201
5. Menu Orientation
Miscellaneous Menu
Please note the following important points regarding EDID:
• For the external computer to correctly see the EDID data, first turn on Encore
power. Then connect the DVI cable from the computer’s video card to one of
Encore’s mixer layers. Then, boot the computer.
• Once EDID programming is complete, you will be prompted to power down the
external computer, power it back on again, and then ensure that the computer’s
format is set to match.
• The system’s EDID PROM is not reset to any default during a factory reset. To
change the EDID, you must use the
EDID DVI Input Format Menu.