Filter
Top Products
Setting Test Control Parameters
3–24
CTS 710 SONET Test Set User Manual
Once the test duration is set, any time a test is started it will run for
the time specified on the Test Duration line.
NOTE. If an instrument setup or pass/fail test is recalled from memory
or disk, it overwrites the test duration specified on the TEST TIME
page.
Figure 3–8: The Test Control Page
Setting a Unique Test Time Duration
To set a test duration time other than the three choices presented, use
the USER DEFINED choice.
Setting Test Control Parameters
3–24
CTS 710 SONET Test Set User Manual
Once the test duration is set, any time a test is started it will run for
the time specified on the Test Duration line.
NOTE. If an instrument setup or pass/fail test is recalled from memory
or disk, it overwrites the test duration specified on the TEST TIME
page.
Figure 3–8: The Test Control Page
Setting a Unique Test Time Duration
To set a test duration time other than the three choices presented, use
the USER DEFINED choice.