Filter
Top Products
CTS 710 SONET Test Set User Manual
3–89
Setting Tributary Signal Transmit
Parameters
This section describes how to set the transmit rate, transmit clock,
line code, framing, and test pattern for a tributary signal.
Steps for Setting Parameters
The sequence of steps for setting transmit parameters varies
depending on the type of signal to be transmitted. Figure 3–33 shows
the sequence of steps required to set the transmit parameters for a
tributary signal (for example, DS3).
Set
Rate
Set
Clock
Set Transmit
Line Code
Set
Framing
Set Test
Pattern
Figure 3–33: Sequence for Setting Tributary Signal Parameters
CTS 710 SONET Test Set User Manual
3–89
Setting Tributary Signal Transmit
Parameters
This section describes how to set the transmit rate, transmit clock,
line code, framing, and test pattern for a tributary signal.
Steps for Setting Parameters
The sequence of steps for setting transmit parameters varies
depending on the type of signal to be transmitted. Figure 3–33 shows
the sequence of steps required to set the transmit parameters for a
tributary signal (for example, DS3).
Set
Rate
Set
Clock
Set Transmit
Line Code
Set
Framing
Set Test
Pattern
Figure 3–33: Sequence for Setting Tributary Signal Parameters