Filter
Top Products
Setting SDHSONET Transmit Parameters
3–80
CTS 710 SONET Test Set User Manual
H Define your own byte with the buttons next to 1 and 0. Use
the left and right arrow buttons to move the cursor from one
bit to the next. See Figure 3–29.
H When you finish editing the byte, select DONE.
Figure 3–29: Editing an Overhead Byte
Editing the V5 Byte
To edit the V5 byte (VT1.5 Mapping Only):
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT PATH
OVERHEAD
Overhead View VT1.5 Overhead
Only bits 5, 6, and 7 (the signal label bits) of the V5 byte are
editable. See Table 3–7.
Setting SDHSONET Transmit Parameters
3–80
CTS 710 SONET Test Set User Manual
H Define your own byte with the buttons next to 1 and 0. Use
the left and right arrow buttons to move the cursor from one
bit to the next. See Figure 3–29.
H When you finish editing the byte, select DONE.
Figure 3–29: Editing an Overhead Byte
Editing the V5 Byte
To edit the V5 byte (VT1.5 Mapping Only):
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT PATH
OVERHEAD
Overhead View VT1.5 Overhead
Only bits 5, 6, and 7 (the signal label bits) of the V5 byte are
editable. See Table 3–7.