Filter
Top Products
Setting TributaryPDH Receive Parameters
CTS 710 SONET Test Set User Manual
3–125
To specify the framing of a received tributary signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Framing as appropriate
NOTE. The choices available for Framing depend on the selected
Receive Rate.
H Select DS1 Unframed to receive an unframed DS1 signal.
H Select DS1 SF (D4) to receive a DS1 signal with SuperFrame
framing.
H Select DS1 ESF to receive a DS1 signal with Extended
SuperFrame framing.
H Select DS3 Unframed to receive an unframed DS3 signal.
H Select DS3 C-bit to receive a DS3 signal using C-bit framing.
H Select DS3 M13 to receive a DS3 signal using M13 framing.
Specifying the Test Pattern
To specify the test pattern of the received signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Test Pattern
as appropriate
NOTE. The choices available for Test Pattern depend on the selected
Receive Rate.
Setting TributaryPDH Receive Parameters
CTS 710 SONET Test Set User Manual
3–125
To specify the framing of a received tributary signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Framing as appropriate
NOTE. The choices available for Framing depend on the selected
Receive Rate.
H Select DS1 Unframed to receive an unframed DS1 signal.
H Select DS1 SF (D4) to receive a DS1 signal with SuperFrame
framing.
H Select DS1 ESF to receive a DS1 signal with Extended
SuperFrame framing.
H Select DS3 Unframed to receive an unframed DS3 signal.
H Select DS3 C-bit to receive a DS3 signal using C-bit framing.
H Select DS3 M13 to receive a DS3 signal using M13 framing.
Specifying the Test Pattern
To specify the test pattern of the received signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Test Pattern
as appropriate
NOTE. The choices available for Test Pattern depend on the selected
Receive Rate.