Filter
Top Products
Index
CTS 710 SONET Test Set User Manual
Index–3
Default (XXXXXXXX), TRANS-
PORT OVERHEAD, 3–79
Default 0ppm, Frequency Offset,
3–150
Default 4, GPIB Primary Address,
REMOTE CONTROL, 3–207
Default 50ms, Pointer Rate, 3–147
Default 522, Pointer Value Set to,
3–145
Default 78, Pointer Value Set to,
3–146
default settings, C–1
Default Trace, J1 byte, 3–83
Delete, Edit Mode, 2–22
Delete File
RECALL INSTRUMENT SET-
UPS, 3–36
RECALL PASS/FAIL TESTS,
3–53
RECALL RESULTS, 3–195
deleting a pass/fail test from disk,
3–53
deleting test results, 3–195
deleting text, 2–22
Description
SAVE INSTRUMENT SETUPS,
3–33
SAVE PASS/FAIL TESTS, 3–38,
3–45
SAVE RESULTS, 3–193
Destination Node ID, APS COM-
MANDS, 3–165
Detected, SAVE PASS/FAIL
TESTS, 3–39
dimmed text, 2–16
Disk
RECALL INSTRUMENT SET-
UPS, 3–34
RECALL PASS/FAIL TESTS,
3–52
RECALL RESULTS, 3–194,
3–195
SAVE PASS/FAIL TESTS, 3–50
disk drive, 2–23
disk file names, reading, 2–24
Display Brightness, MISC SET-
TINGS, 3–200
displaying history graphs, 3–182
displaying results, 3–173, 3–175,
3–177
DNR, APS COMMANDS, 3–164
Do Nothing, On Test Completion,
3–49
DONE, Edit Mode, 2–19, 2–21,
2–23
Double Alternating, 3–155, 3–156
Dropped Rx Clock, Overhead
Add/Drop Port, G–6
Dropped Rx Data, Overhead Add/
Drop Port, G–6
dropping a tributary signal, 3–110
DS1 add, 3–72
DS1 drop, 3–110
DS1 ESF
DS1 Framing, 3–108, 3–128
Framing, 3–95, 3–125
Payload, 3–74, 3–111
DS1 Ext Add, Payload, 3–74
DS1 Path Analysis, ERROR
ANALYSIS, 3–181
Index
CTS 710 SONET Test Set User Manual
Index–3
Default (XXXXXXXX), TRANS-
PORT OVERHEAD, 3–79
Default 0ppm, Frequency Offset,
3–150
Default 4, GPIB Primary Address,
REMOTE CONTROL, 3–207
Default 50ms, Pointer Rate, 3–147
Default 522, Pointer Value Set to,
3–145
Default 78, Pointer Value Set to,
3–146
default settings, C–1
Default Trace, J1 byte, 3–83
Delete, Edit Mode, 2–22
Delete File
RECALL INSTRUMENT SET-
UPS, 3–36
RECALL PASS/FAIL TESTS,
3–53
RECALL RESULTS, 3–195
deleting a pass/fail test from disk,
3–53
deleting test results, 3–195
deleting text, 2–22
Description
SAVE INSTRUMENT SETUPS,
3–33
SAVE PASS/FAIL TESTS, 3–38,
3–45
SAVE RESULTS, 3–193
Destination Node ID, APS COM-
MANDS, 3–165
Detected, SAVE PASS/FAIL
TESTS, 3–39
dimmed text, 2–16
Disk
RECALL INSTRUMENT SET-
UPS, 3–34
RECALL PASS/FAIL TESTS,
3–52
RECALL RESULTS, 3–194,
3–195
SAVE PASS/FAIL TESTS, 3–50
disk drive, 2–23
disk file names, reading, 2–24
Display Brightness, MISC SET-
TINGS, 3–200
displaying history graphs, 3–182
displaying results, 3–173, 3–175,
3–177
DNR, APS COMMANDS, 3–164
Do Nothing, On Test Completion,
3–49
DONE, Edit Mode, 2–19, 2–21,
2–23
Double Alternating, 3–155, 3–156
Dropped Rx Clock, Overhead
Add/Drop Port, G–6
Dropped Rx Data, Overhead Add/
Drop Port, G–6
dropping a tributary signal, 3–110
DS1 add, 3–72
DS1 drop, 3–110
DS1 ESF
DS1 Framing, 3–108, 3–128
Framing, 3–95, 3–125
Payload, 3–74, 3–111
DS1 Ext Add, Payload, 3–74
DS1 Path Analysis, ERROR
ANALYSIS, 3–181