Filter
Top Products
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–65
rate while simultaneously transmitting an optical signal at the OC-3
rate.
However, when working with tributary and DSn signals, the transmit
and receive parameters are not completely independent. You cannot
transmit a DS1 signal and receive a DS3 signal. When working with
tributary signals, you must set the mapping for transmit and receive
to the same value or to Bulk Fill No Mapping. For example, you
can transmit a DS1 signal and receive an OC-12 signal, but you must
set the mapping of the received signal to either Bulk Fill No
Mapping or DS1; it cannot be set to DS3.
Coupling Transmit and Receive Settings
If your application requires that the transmit settings and receive
settings be identical, you can save time by coupling them together.
After they are coupled, any change you make to a parameter on the
TRANSMIT SETTINGS page will also be made to the correspond-
ing setting in the RECEIVE SETTINGS page of the RECEIVE
menu. The inverse is also true.
Available SONET
Transmit rates
Figure 3–24: SONET Transmit Rates
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–65
rate while simultaneously transmitting an optical signal at the OC-3
rate.
However, when working with tributary and DSn signals, the transmit
and receive parameters are not completely independent. You cannot
transmit a DS1 signal and receive a DS3 signal. When working with
tributary signals, you must set the mapping for transmit and receive
to the same value or to Bulk Fill No Mapping. For example, you
can transmit a DS1 signal and receive an OC-12 signal, but you must
set the mapping of the received signal to either Bulk Fill No
Mapping or DS1; it cannot be set to DS3.
Coupling Transmit and Receive Settings
If your application requires that the transmit settings and receive
settings be identical, you can save time by coupling them together.
After they are coupled, any change you make to a parameter on the
TRANSMIT SETTINGS page will also be made to the correspond-
ing setting in the RECEIVE SETTINGS page of the RECEIVE
menu. The inverse is also true.
Available SONET
Transmit rates
Figure 3–24: SONET Transmit Rates