Filter
Top Products
Setting Pointers and Changing Timing
CTS 710 SONET Test Set User Manual
3–147
Continuous Pointer Movement
To make repetitive pointer movements:
1. Specify the type of pointer control and movement rate as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Pointer Control Continuous
Pointer Rate Max 48 ms
(Mapping = VT1.5
Async only)
Max 2ms
Min 10000ms
Default 50ms
USER DEFINED
H Select Max 48ms to move the pointer one location every 48
milliseconds.
H Select Max 2ms to move the pointer one location every
sixteen frames.
H Select Min 10000ms to move the pointer location one
location every 10 seconds.
H Select Default 50ms to move the pointer one location every
50 ms.
H Select USER DEFINED to set continuous pointer movement
at a rate different from the preset choices.
2. Select USER DEFINED to set the pointer movement to a value
different from the preset choices.
Selecting USER DEFINED places the CTS 710 into Edit Mode.
Now you can set the rate to the exact value you want, with 1 ms
resolution. The minimum rate is 1 ms. The maximum rate is
10000 ms.
Setting Pointers and Changing Timing
CTS 710 SONET Test Set User Manual
3–147
Continuous Pointer Movement
To make repetitive pointer movements:
1. Specify the type of pointer control and movement rate as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Pointer Control Continuous
Pointer Rate Max 48 ms
(Mapping = VT1.5
Async only)
Max 2ms
Min 10000ms
Default 50ms
USER DEFINED
H Select Max 48ms to move the pointer one location every 48
milliseconds.
H Select Max 2ms to move the pointer one location every
sixteen frames.
H Select Min 10000ms to move the pointer location one
location every 10 seconds.
H Select Default 50ms to move the pointer one location every
50 ms.
H Select USER DEFINED to set continuous pointer movement
at a rate different from the preset choices.
2. Select USER DEFINED to set the pointer movement to a value
different from the preset choices.
Selecting USER DEFINED places the CTS 710 into Edit Mode.
Now you can set the rate to the exact value you want, with 1 ms
resolution. The minimum rate is 1 ms. The maximum rate is
10000 ms.