Filter
Top Products
Setting SONETSDH Receive Parameters
3–100
CTS 710 SONET Test Set User Manual
Set
Rate
Set Level
(STS Rates
only)
Set Signal
Structure
Specify STS
Under Test
Set
Mapping
Set VT Under Test
(Mapping = VT1.5
Async only)
Set Payload
(Mapping=
VT1.5 Async,
DS3 only)
Set Test
Pattern
Set Tributary Drop
(Mapping = VT1.5
Async, DS3 only)
Figure 3–37: Sequence for Setting SONET Signal Parameters When Demapping a
Tributary Signal
Setting the Receive Rate
To set the receive rate:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
(see Figure 3–38)
Receive Rate as appropriate
H Select STS-1, STS-3, OC-1, OC-3, or OC-12 to receive a
SONET signal.
H Select DS1, DS3, or DS3→DS1 to receive a tributary rate signal.
See page 3–121 for details on setting tributary signal parameters.
Setting SONETSDH Receive Parameters
3–100
CTS 710 SONET Test Set User Manual
Set
Rate
Set Level
(STS Rates
only)
Set Signal
Structure
Specify STS
Under Test
Set
Mapping
Set VT Under Test
(Mapping = VT1.5
Async only)
Set Payload
(Mapping=
VT1.5 Async,
DS3 only)
Set Test
Pattern
Set Tributary Drop
(Mapping = VT1.5
Async, DS3 only)
Figure 3–37: Sequence for Setting SONET Signal Parameters When Demapping a
Tributary Signal
Setting the Receive Rate
To set the receive rate:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
(see Figure 3–38)
Receive Rate as appropriate
H Select STS-1, STS-3, OC-1, OC-3, or OC-12 to receive a
SONET signal.
H Select DS1, DS3, or DS3→DS1 to receive a tributary rate signal.
See page 3–121 for details on setting tributary signal parameters.