Filter
Top Products
Setting SONETSDH Receive Parameters
3–102
CTS 710 SONET Test Set User Manual
RECEIVE SETTINGS page will also be made to the corresponding
setting in the TRANSMIT SETTINGS page of the RECEIVE menu.
The inverse is also true.
To couple the receive and transmit settings together from the
RECEIVE SETTINGS page:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Coupled
NOTE. When settings are coupled from the RECEIVE SETTINGS
page, the transmit parameters are changed to match the receive
parameters. Conversely, when settings are coupled from the
TRANSMIT SETTINGS page, the receive parameters are changed to
match the transmit parameters.
To change receive and transmit settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.
Setting SONETSDH Receive Parameters
3–102
CTS 710 SONET Test Set User Manual
RECEIVE SETTINGS page will also be made to the corresponding
setting in the TRANSMIT SETTINGS page of the RECEIVE menu.
The inverse is also true.
To couple the receive and transmit settings together from the
RECEIVE SETTINGS page:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Coupled
NOTE. When settings are coupled from the RECEIVE SETTINGS
page, the transmit parameters are changed to match the receive
parameters. Conversely, when settings are coupled from the
TRANSMIT SETTINGS page, the receive parameters are changed to
match the transmit parameters.
To change receive and transmit settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.