Filter
Top Products
Setting SONETSDH Receive Parameters
3–116
CTS 710 SONET Test Set User Manual
2. Select the columns you wish to display as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Showing
Overhead for
as appropriate
Viewing Path Overhead Bytes
To view path overhead bytes:
1. Display the path overhead as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE TRANSPORT
OVERHEAD
Overhead View VT1.5 Overhead
NOTE. The choices available depend on the mapping of the received
signal.
H Select VT1.5 Overhead to display the V5 overhead byte.
Displaying the J1 Path Trace Message
To view the Path Trace Message:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE PATH
OVERHEAD
(see Figure 3–41)
none none
Setting SONETSDH Receive Parameters
3–116
CTS 710 SONET Test Set User Manual
2. Select the columns you wish to display as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Showing
Overhead for
as appropriate
Viewing Path Overhead Bytes
To view path overhead bytes:
1. Display the path overhead as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE TRANSPORT
OVERHEAD
Overhead View VT1.5 Overhead
NOTE. The choices available depend on the mapping of the received
signal.
H Select VT1.5 Overhead to display the V5 overhead byte.
Displaying the J1 Path Trace Message
To view the Path Trace Message:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE PATH
OVERHEAD
(see Figure 3–41)
none none