Filter
Top Products
Getting Started
1–10
CTS 710 SONET Test Set User Manual
ON/STBY
Button
Figure 1–5: ON/STBY Button
The CTS 710 performs an internal self test each time it is turned on.
When turned on, it displays a screen that states whether or not it
passed the self test. (If the self test passes, the status display screen is
removed after a few seconds.)
3. Check the self-test results.
If the self test fails, contact your local Tektronix Service Center for
assistance.
Turning Off the CTS 710
Press the ON/STBY button to turn off the CTS 710.
Once the CTS 710 is in use, it is typical to leave the principal power
switch on and use the ON/STBY button as the power switch. If the
CTS 710 is frequently moved, use the principal power switch to turn
the CTS 710 on and off.
Getting Started
1–10
CTS 710 SONET Test Set User Manual
ON/STBY
Button
Figure 1–5: ON/STBY Button
The CTS 710 performs an internal self test each time it is turned on.
When turned on, it displays a screen that states whether or not it
passed the self test. (If the self test passes, the status display screen is
removed after a few seconds.)
3. Check the self-test results.
If the self test fails, contact your local Tektronix Service Center for
assistance.
Turning Off the CTS 710
Press the ON/STBY button to turn off the CTS 710.
Once the CTS 710 is in use, it is typical to leave the principal power
switch on and use the ON/STBY button as the power switch. If the
CTS 710 is frequently moved, use the principal power switch to turn
the CTS 710 on and off.