Filter
Top Products
Setting SONETSDH Receive Parameters
3–104
CTS 710 SONET Test Set User Manual
To specify the structure of a received STS-3, OC-3, or OC-12 signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Signal Structure STS-1
STS-3c
Specifying Which STS to Test
If you are using a line rate other than the SONET basic-level rates
STS-1 or OC-1, you must select one STS to test.
To designate which STS to test:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
STS Under Test as appropriate
Setting the Mapping
You can specify whether the payload contains live data or not. If you
know the mapping of the received signal, you can specify what the
mapping is on the RECEIVE SETTINGS page.
NOTE. The CTS 710 cannot demap a tributary signal and transmit a
tributary signal at the same time.
Setting SONETSDH Receive Parameters
3–104
CTS 710 SONET Test Set User Manual
To specify the structure of a received STS-3, OC-3, or OC-12 signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Signal Structure STS-1
STS-3c
Specifying Which STS to Test
If you are using a line rate other than the SONET basic-level rates
STS-1 or OC-1, you must select one STS to test.
To designate which STS to test:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
STS Under Test as appropriate
Setting the Mapping
You can specify whether the payload contains live data or not. If you
know the mapping of the received signal, you can specify what the
mapping is on the RECEIVE SETTINGS page.
NOTE. The CTS 710 cannot demap a tributary signal and transmit a
tributary signal at the same time.