Filter
Top Products
Setting Pointers and Changing Timing
3–146
CTS 710 SONET Test Set User Manual
H Select Min 0 to set the pointer to location zero. If you choose this
setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Max 103 to set the pointer to location 103. If you choose
this setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Default 78 to set the pointer to location 78. If you choose
this setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Illegal (Max+1) to move the pointer to illegal location 104
(the maximum allowed location + 1). Choosing the illegal pointer
location may cause a loss-of-pointer failure. If you choose this
setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
3. Specify whether a New Data Flag is set with the pointer
movement as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Set with New
Data Flag
Yes
No
4. Set the Pointer S-Bits as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Pointer S–Bits 00
01
10
11
Setting Pointers and Changing Timing
3–146
CTS 710 SONET Test Set User Manual
H Select Min 0 to set the pointer to location zero. If you choose this
setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Max 103 to set the pointer to location 103. If you choose
this setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Default 78 to set the pointer to location 78. If you choose
this setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
H Select Illegal (Max+1) to move the pointer to illegal location 104
(the maximum allowed location + 1). Choosing the illegal pointer
location may cause a loss-of-pointer failure. If you choose this
setting, the pointer is moved immediately; you do not need to
press POINTER ACTION.
3. Specify whether a New Data Flag is set with the pointer
movement as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Set with New
Data Flag
Yes
No
4. Set the Pointer S-Bits as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Pointer S–Bits 00
01
10
11