Filter
Top Products
Testing Automatic Protection Switching
CTS 710 SONET Test Set User Manual
3–171
NOTE. You can edit the transmitted K1 and K2 bytes directly from the
TRANSPORT OVERHEAD page.
To transmit new K1 and K2 bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT APS
COMMANDS
Transmit Setup Transmit User
Setup
Transmit Default
Transmit Illegal
NOTE. You cannot transmit new values for the K1 or K2 bytes when
the CTS 710 is transmitting a Line AIS or Line FERF.
H Select Transmit User Setup to change the value of the K1 and
K2 bytes to that shown under USER SETUP.
H Select Transmit Default to change all the bits in the K1 and K2
bytes to zeros.
H Select Transmit Illegal to change all the bits in the K1 and K2
bytes to ones.
When you select an action from the Transmit Setup line, the
TRANSMIT column is updated.
Testing Automatic Protection Switching
CTS 710 SONET Test Set User Manual
3–171
NOTE. You can edit the transmitted K1 and K2 bytes directly from the
TRANSPORT OVERHEAD page.
To transmit new K1 and K2 bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT APS
COMMANDS
Transmit Setup Transmit User
Setup
Transmit Default
Transmit Illegal
NOTE. You cannot transmit new values for the K1 or K2 bytes when
the CTS 710 is transmitting a Line AIS or Line FERF.
H Select Transmit User Setup to change the value of the K1 and
K2 bytes to that shown under USER SETUP.
H Select Transmit Default to change all the bits in the K1 and K2
bytes to zeros.
H Select Transmit Illegal to change all the bits in the K1 and K2
bytes to ones.
When you select an action from the Transmit Setup line, the
TRANSMIT column is updated.