Filter
Top Products
Tutorial
2–38
CTS 710 SONET Test Set User Manual
After selecting Single for pointer control, a message displays that
tells you how to adjust the pointer. Pointer movement alternates
between increment and decrement.
To adjust a pointer, press the front-panel POINTER ACTION
button.
Each time you press POINTER ACTION, a pointer adjusts and the
POINTER ACTION light turns on. Also, a message appears at the
top of the display that describes the type of pointer movement that
occurs. On this page you can also adjust frequency offset which may
cause a network element to generate pointer movements.
To see the pointer value changing:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RESULTS MAIN RESULTS none Pointers
Now press POINTER ACTION again.
To adjust a pointer using frequency offset:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT POINTERS &
TIMING
Pointer / Timing
Mode
Frequency Offset
After selecting Frequency Offset, note that the available parameters
change. When in Frequency Offset mode, the only parameters that
can be set are Offset Mode and Frequency Offset.
To change the frequency offset of the signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Frequency Offset Stress +4.6ppm
Tutorial
2–38
CTS 710 SONET Test Set User Manual
After selecting Single for pointer control, a message displays that
tells you how to adjust the pointer. Pointer movement alternates
between increment and decrement.
To adjust a pointer, press the front-panel POINTER ACTION
button.
Each time you press POINTER ACTION, a pointer adjusts and the
POINTER ACTION light turns on. Also, a message appears at the
top of the display that describes the type of pointer movement that
occurs. On this page you can also adjust frequency offset which may
cause a network element to generate pointer movements.
To see the pointer value changing:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RESULTS MAIN RESULTS none Pointers
Now press POINTER ACTION again.
To adjust a pointer using frequency offset:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT POINTERS &
TIMING
Pointer / Timing
Mode
Frequency Offset
After selecting Frequency Offset, note that the available parameters
change. When in Frequency Offset mode, the only parameters that
can be set are Offset Mode and Frequency Offset.
To change the frequency offset of the signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Frequency Offset Stress +4.6ppm