Tektronix cts710 Surge Protector User Manual


 
Working with Test Setups
CTS 710 SONET Test Set User Manual
3–37
Pass/Fail Tests
A pass/fail test is an easy way to run a test and get a simple response
stating whether or not the CTS 710 encountered the specified errors
during the test. When a pass/fail test completes, the CTS 710
displays a message stating that either the test passed or failed.
Pass/fail tests are set up in the TEST SETUPS menu on the SAVE
PASS/FAIL TESTS page (see Figure 3–14). A pass/fail test consists
of instrument setup information and the parameters described in
Parameters of a Pass/Fail Test.
Figure 3–14: The SAVE PASS/FAIL TESTS Page
Parameters of a Pass/Fail Test
A pass/fail test has the following parameters (some parameters are
optional):
H Name. The name of the test, a mandatory parameter. It can be up
to eight-characters long. The name of the test also serves as the
file name for the test when you save it to disk.
Working with Test Setups
CTS 710 SONET Test Set User Manual
3–37
Pass/Fail Tests
A pass/fail test is an easy way to run a test and get a simple response
stating whether or not the CTS 710 encountered the specified errors
during the test. When a pass/fail test completes, the CTS 710
displays a message stating that either the test passed or failed.
Pass/fail tests are set up in the TEST SETUPS menu on the SAVE
PASS/FAIL TESTS page (see Figure 3–14). A pass/fail test consists
of instrument setup information and the parameters described in
Parameters of a Pass/Fail Test.
Figure 3–14: The SAVE PASS/FAIL TESTS Page
Parameters of a Pass/Fail Test
A pass/fail test has the following parameters (some parameters are
optional):
H Name. The name of the test, a mandatory parameter. It can be up
to eight-characters long. The name of the test also serves as the
file name for the test when you save it to disk.