Filter
Top Products
Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual
3–93
H Select Recovered to use the clock recovered from an incoming
signal.
H Select External BITS to use the clock signal from an external
BITS reference. Attach the external BITS reference to the BITS
connector on the rear panel.
H Select External DSn to use an external DS1/DS3 clock. Attach
the clock to the external clock connector located on the rear
panel.
Setting the Line Clock Offset
To specify the line clock offset:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
LIne Clock Offset Max +100ppm
Stress +1.0ppm
Stress –1.0ppm
USER DEFINED
H Select USER DEFINED to specify a clock offset different from
the preset choices.
Setting the Transmit Line Code
To specify the transmit line code for the tributary signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Transmit Line
Code
as appropriate
Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual
3–93
H Select Recovered to use the clock recovered from an incoming
signal.
H Select External BITS to use the clock signal from an external
BITS reference. Attach the external BITS reference to the BITS
connector on the rear panel.
H Select External DSn to use an external DS1/DS3 clock. Attach
the clock to the external clock connector located on the rear
panel.
Setting the Line Clock Offset
To specify the line clock offset:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
LIne Clock Offset Max +100ppm
Stress +1.0ppm
Stress –1.0ppm
USER DEFINED
H Select USER DEFINED to specify a clock offset different from
the preset choices.
Setting the Transmit Line Code
To specify the transmit line code for the tributary signal:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Transmit Line
Code
as appropriate