Filter
Top Products
Working with Test Setups
3–32
CTS 710 SONET Test Set User Manual
Saving Instrument Setups
To save an instrument setup:
1. Set up the CTS 710 as desired. Set all instrument parameters as
required.
2. To save an instrument setup to disk, it must have a name. Enter a
file name as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE
INSTRUMENT
SETUPS
(see Figure 3–11)
Name SETUP_XX
EDIT NAME
H If you wish to label the setup file as SETUP<Number>, you
can save time by selecting SETUP_XX. Once you select
SETUP_XX, select EDIT NAME and edit XX to the desired
number (or letter). Select DONE when you are finished
editing the setup name. The instrument setup name can be up
to eight characters long.
H Select EDIT NAME to enter a name other than SETUP_XX.
Select DONE when you are finished editing the setup name.
The instrument setup name can be up to eight characters long.
Working with Test Setups
3–32
CTS 710 SONET Test Set User Manual
Saving Instrument Setups
To save an instrument setup:
1. Set up the CTS 710 as desired. Set all instrument parameters as
required.
2. To save an instrument setup to disk, it must have a name. Enter a
file name as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE
INSTRUMENT
SETUPS
(see Figure 3–11)
Name SETUP_XX
EDIT NAME
H If you wish to label the setup file as SETUP<Number>, you
can save time by selecting SETUP_XX. Once you select
SETUP_XX, select EDIT NAME and edit XX to the desired
number (or letter). Select DONE when you are finished
editing the setup name. The instrument setup name can be up
to eight characters long.
H Select EDIT NAME to enter a name other than SETUP_XX.
Select DONE when you are finished editing the setup name.
The instrument setup name can be up to eight characters long.