Filter
Top Products
Setting SONETSDH Receive Parameters
3–118
CTS 710 SONET Test Set User Manual
2. Configure the CTS 710 to drop the DCC data bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE TRANSPORT
OVERHEAD
External Drop
(see Figure 3–42)
None
D1–D3
D4–D12
F1
H Select None if you do not want to drop the DCC bytes.
H Select D1–D3 to drop the D1–D3 bytes of the DCC.
H Select D4–D12 to drop the D4–D12 bytes of the DCC.
H Select F1 to drop the F1 byte of the DCC.
Figure 3–42: Dropping Data from the DCC
Setting SONETSDH Receive Parameters
3–118
CTS 710 SONET Test Set User Manual
2. Configure the CTS 710 to drop the DCC data bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE TRANSPORT
OVERHEAD
External Drop
(see Figure 3–42)
None
D1–D3
D4–D12
F1
H Select None if you do not want to drop the DCC bytes.
H Select D1–D3 to drop the D1–D3 bytes of the DCC.
H Select D4–D12 to drop the D4–D12 bytes of the DCC.
H Select F1 to drop the F1 byte of the DCC.
Figure 3–42: Dropping Data from the DCC