Filter
Top Products
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–85
2. To configure the CTS 710 to add the external data bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSPORT
OVERHEAD
External Add None
D1–D3
D4–D12
F1
H Select None if you do not want to add external data.
H Select D1–D3 to add data, generated by an external protocol
analyzer, to the D1–D3 bytes of the DCC.
H Select D4–D12 to add data, generated by an external protocol
analyzer, to the D4–D12 bytes of the DCC.
H Select F1 to add data, generated by an external protocol
analyzer, to the F1 byte of the DCC.
As soon as you select which bytes to add data to, the CTS 710
displays the words EXT ADD as the value for the selected bytes (see
Figure 3–31).
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–85
2. To configure the CTS 710 to add the external data bytes:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSPORT
OVERHEAD
External Add None
D1–D3
D4–D12
F1
H Select None if you do not want to add external data.
H Select D1–D3 to add data, generated by an external protocol
analyzer, to the D1–D3 bytes of the DCC.
H Select D4–D12 to add data, generated by an external protocol
analyzer, to the D4–D12 bytes of the DCC.
H Select F1 to add data, generated by an external protocol
analyzer, to the F1 byte of the DCC.
As soon as you select which bytes to add data to, the CTS 710
displays the words EXT ADD as the value for the selected bytes (see
Figure 3–31).