Filter
Top Products
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–73
Figure 3–26: Mapping a Tributary Signal
To configure the CTS 710 for mapping a signal:
1. Set the mapping as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Mapping VT 1.5 Async
DS3
H Select VT 1.5 to specify VT1.5 Floating Asynchronous
mapping. An externally supplied or internally generated DS1
signal is mapped into the selected VT under test while the
other 27 VTs contain a background pattern.
H Select DS3 to map an externally supplied or internally
generated DS3 signal to the transmitted signal.
Setting SDHSONET Transmit Parameters
CTS 710 SONET Test Set User Manual
3–73
Figure 3–26: Mapping a Tributary Signal
To configure the CTS 710 for mapping a signal:
1. Set the mapping as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TRANSMIT TRANSMIT
SETTINGS
Mapping VT 1.5 Async
DS3
H Select VT 1.5 to specify VT1.5 Floating Asynchronous
mapping. An externally supplied or internally generated DS1
signal is mapped into the selected VT under test while the
other 27 VTs contain a background pattern.
H Select DS3 to map an externally supplied or internally
generated DS3 signal to the transmitted signal.