Filter
Top Products
Changing Instrument Settings
3–210
CTS 710 SONET Test Set User Manual
Press Menu
Button
Select Choice
Highlight
Parameter
Select Menu
Page
Tx Terminator LF
CR
CR/LF
LF/CR
H For Tx Delay, select one of the preset choices or use Inc and Dec
to specify a value different from the preset choices.
H The maximum value for Tx Delay is 60. The minimum value
is 0.
Running Instrument Self Tests
The CTS 710 provides self-contained tests that can be run any time
you suspect the CTS 710 may not be performing properly.
The only test you might need to perform is the Power up Self Test.
The other self tests available for selection are for servicing the
instrument. Complete details on the self tests are located in the
CTS 710 SONET Test Set & CTS 750 SDH Test Set Service manual.
Changing Instrument Settings
3–210
CTS 710 SONET Test Set User Manual
Press Menu
Button
Select Choice
Highlight
Parameter
Select Menu
Page
Tx Terminator LF
CR
CR/LF
LF/CR
H For Tx Delay, select one of the preset choices or use Inc and Dec
to specify a value different from the preset choices.
H The maximum value for Tx Delay is 60. The minimum value
is 0.
Running Instrument Self Tests
The CTS 710 provides self-contained tests that can be run any time
you suspect the CTS 710 may not be performing properly.
The only test you might need to perform is the Power up Self Test.
The other self tests available for selection are for servicing the
instrument. Complete details on the self tests are located in the
CTS 710 SONET Test Set & CTS 750 SDH Test Set Service manual.