Filter
Top Products
Working with Test Setups
3–44
CTS 710 SONET Test Set User Manual
Table 3–4: Fail If Conditions of a Pass/Fail Test (Cont.)
Condition Type ThresholdSpecific Condition
VT NDF’s >0
>1
>10
>60
USER (0–10000)
VT Ptr. Justifys >0
>1
>10
>60
USER (0–10000)
Creating a Pass/Fail Test
To create a pass/fail test:
1. Set up the CTS 710 as required to perform the desired test.
Set all transmit and receive parameters as necessary. When the
pass/fail test is recalled, the CTS 710 is set up exactly as it was
when the pass/fail test was saved.
2. Set the name of the pass/fail test as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE PASS/FAIL
TESTS
(see Figure 3–14)
Name TEST_XX
EDIT NAME
Clear
H If you wish to name the test file as TEST<Number>, you can
save time by selecting TEST_XX. Once you select
TEST_XX, select EDIT NAME and edit XX to the desired
Working with Test Setups
3–44
CTS 710 SONET Test Set User Manual
Table 3–4: Fail If Conditions of a Pass/Fail Test (Cont.)
Condition Type ThresholdSpecific Condition
VT NDF’s >0
>1
>10
>60
USER (0–10000)
VT Ptr. Justifys >0
>1
>10
>60
USER (0–10000)
Creating a Pass/Fail Test
To create a pass/fail test:
1. Set up the CTS 710 as required to perform the desired test.
Set all transmit and receive parameters as necessary. When the
pass/fail test is recalled, the CTS 710 is set up exactly as it was
when the pass/fail test was saved.
2. Set the name of the pass/fail test as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
TEST SETUPS SAVE PASS/FAIL
TESTS
(see Figure 3–14)
Name TEST_XX
EDIT NAME
Clear
H If you wish to name the test file as TEST<Number>, you can
save time by selecting TEST_XX. Once you select
TEST_XX, select EDIT NAME and edit XX to the desired