Filter
Top Products
Setting TributaryPDH Receive Parameters
3–124
CTS 710 SONET Test Set User Manual
To change receive and transmit settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.
Setting the Receive Level
To specify the receive level for electrical signals:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Receive Level Normal
Monitor
Bridge
H Select Normal to set the line level to normal.
H Select Monitor to set the line level to the monitor level.
H Select Bridge to set the line level to the bridged level.
Setting the Framing
When receiving a tributary signal you can specify the framing of the
signal.
Setting TributaryPDH Receive Parameters
3–124
CTS 710 SONET Test Set User Manual
To change receive and transmit settings so that they are no longer
coupled:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Tx/Rx Settings Independent
Notice that the signal status icons, in the upper-right corner of the
display, changed to indicate that the settings are no longer coupled.
Setting the Receive Level
To specify the receive level for electrical signals:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
RECEIVE RECEIVE
SETTINGS
Receive Level Normal
Monitor
Bridge
H Select Normal to set the line level to normal.
H Select Monitor to set the line level to the monitor level.
H Select Bridge to set the line level to the bridged level.
Setting the Framing
When receiving a tributary signal you can specify the framing of the
signal.