Filter
Top Products
Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual
3–97
If you select User Word 8 bit/16 bit/24 bit for the test pattern, set the
value of the User Word as follows:
1. Set the contents of the User Word as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Test Pattern
Set to 00000000
Set to 11111111
Default 10101010
EDIT BYTE/
Edit XX bits
2. Select EDIT BYTE/Edit XX bits to specify a value different
from the preset choices (see Figure 3–35).
3. Select Predefined Patterns if you decide to use the standard
patterns.
4. Select DONE when you are finished editing the byte.
Figure 3–35: Editing the User Word
Setting Tributary SignalPDH Transmit Parameters
CTS 710 SONET Test Set User Manual
3–97
If you select User Word 8 bit/16 bit/24 bit for the test pattern, set the
value of the User Word as follows:
1. Set the contents of the User Word as follows:
Press Menu
Button
Select Menu
Page
Highlight
Parameter
Select Choice
Test Pattern
Set to 00000000
Set to 11111111
Default 10101010
EDIT BYTE/
Edit XX bits
2. Select EDIT BYTE/Edit XX bits to specify a value different
from the preset choices (see Figure 3–35).
3. Select Predefined Patterns if you decide to use the standard
patterns.
4. Select DONE when you are finished editing the byte.
Figure 3–35: Editing the User Word