Filter
Top Products
Appendix D: Specifications
D–6
CTS 710 SONET Test Set User Manual
Table D–1: Standard CTS 710 Specifications (Cont.)
Characteristic Description
Phase transient pointer adjustment
burst
Time between 7 pointers is 0.25 s, 0.25 s, 0.5 s,
0.5 s, 0.5 s, 0.5 s.
Time between pointer burst: 30 s.
Periodic pointer adjustment
– 87–3 pattern
– 87–3 pattern
– 87–3 pattern with Cancelled pointer movement
number 87
– 87–3 pattern with Added pointer after the 43rd
pointer
Periodic pointer adjustment
– continuous pattern
– continuous pattern
– continuous pattern with cancellation of one
pointer
– continuous pattern with added pointer
Pointer Direction Positive or Negative
Initialization Period On or Off
Thirty second burst of 1 pointer per second in the
same direction as the selected test
Cool Down Period On or Off
This will last at least 60 seconds
Measurements
Error Count, Error Rate, and
Errored Seconds for:
B1, B2, B3, Payload, Line-FEBE, Path-FEBE
Alarm and Failure Seconds for LOS, OOF, LOF, SPE LOP, Line AIS & FERF, Path
AIS & FERF, Loss of Power, Loss of Pattern Sync
STS SPE Pointer Measurements Seconds: Count:
LOP Illegal pointers
Illegal pointers Positive justifications
NDF Negative justifications
T1M1.3 Analysis
Section B1
Seconds and ratio
Error Blocks, ES, SES, UAS
Background Block Errors
Line B2 & FEBE
Seconds and % of total time
Error-Count, ES, ES-A, ES-B, SES, UAS, EFS
FEBE-Count, FEBE-ES, FEBE-UAS, FEBE-EFS
Path B3 & FEBE
Seconds and % of total time
Error-Count, ES, ES-A, ES-B, SES, UAS, EFS
FEBE-Count, FEBE-ES, FEBE-UAS, FEBE-EFS
Appendix D: Specifications
D–6
CTS 710 SONET Test Set User Manual
Table D–1: Standard CTS 710 Specifications (Cont.)
Characteristic Description
Phase transient pointer adjustment
burst
Time between 7 pointers is 0.25 s, 0.25 s, 0.5 s,
0.5 s, 0.5 s, 0.5 s.
Time between pointer burst: 30 s.
Periodic pointer adjustment
– 87–3 pattern
– 87–3 pattern
– 87–3 pattern with Cancelled pointer movement
number 87
– 87–3 pattern with Added pointer after the 43rd
pointer
Periodic pointer adjustment
– continuous pattern
– continuous pattern
– continuous pattern with cancellation of one
pointer
– continuous pattern with added pointer
Pointer Direction Positive or Negative
Initialization Period On or Off
Thirty second burst of 1 pointer per second in the
same direction as the selected test
Cool Down Period On or Off
This will last at least 60 seconds
Measurements
Error Count, Error Rate, and
Errored Seconds for:
B1, B2, B3, Payload, Line-FEBE, Path-FEBE
Alarm and Failure Seconds for LOS, OOF, LOF, SPE LOP, Line AIS & FERF, Path
AIS & FERF, Loss of Power, Loss of Pattern Sync
STS SPE Pointer Measurements Seconds: Count:
LOP Illegal pointers
Illegal pointers Positive justifications
NDF Negative justifications
T1M1.3 Analysis
Section B1
Seconds and ratio
Error Blocks, ES, SES, UAS
Background Block Errors
Line B2 & FEBE
Seconds and % of total time
Error-Count, ES, ES-A, ES-B, SES, UAS, EFS
FEBE-Count, FEBE-ES, FEBE-UAS, FEBE-EFS
Path B3 & FEBE
Seconds and % of total time
Error-Count, ES, ES-A, ES-B, SES, UAS, EFS
FEBE-Count, FEBE-ES, FEBE-UAS, FEBE-EFS