Tektronix cts710 Surge Protector User Manual

Open as PDF

of 410

Table of Contents

CTS 710 SONET Test Set User Manual

Mapping a Tributary Signal (Add/Drop/Test Option Only) 3–72. . .

Mapping a Tributary with VT1.5 Floating Async Payload

Mapping 3–72. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Test Pattern 3–75. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting Overhead Bytes 3–77. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

How to Edit an Overhead Byte 3–77. . . . . . . . . . . . . . . . . . . . . .

Editing the V5 Byte 3–80. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Bytes You Cannot Edit 3–81. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Editing the J1 Path Trace Byte 3–82. . . . . . . . . . . . . . . . . . . . . . .

Adding DCC and User Channel Overhead Bytes 3–84. . . . . . . .

Setting Tributary Signal Transmit Parameters 3–89. . . . . . . . . .

Steps for Setting Parameters 3–89. . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Transmit Rate 3–90. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Independent Transmit and Receive Settings 3–90. . . . . . . . . . . .

Coupling Transmit and Receive Settings 3–90. . . . . . . . . . . . . . .

Setting the Transmit Clock 3–92. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Line Clock Offset 3–93. . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Transmit Line Code 3–93. . . . . . . . . . . . . . . . . . . . . . . . .

Specifying the Framing 3–94. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifying the Test Pattern 3–96. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting SONET Receive Parameters 3–99. . . . . . . . . . . . . . . . . . .

Steps for Setting Parameters 3–99. . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Receive Rate 3–100. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Independent Receive and Transmit Settings 3–101. . . . . . . . . . . .

Coupling Receive and Transmit Settings 3–101. . . . . . . . . . . . . . .

Setting the Receive Level 3–103. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Signal Structure 3–103. . . . . . . . . . . . . . . . . . . . . . . . . . . .

Specifying Which STS to Test 3–104. . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Mapping 3–104. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Demultiplexing a DS1 from a DS3 Mapped in a SONET Signal

(Add/Drop/Test Option Only) 3–107. . . . . . . . . . . . . . . . . . . . . . .

Demapping a Tributary Signal (Add/Drop/Test Option Only) 3–110.

Dropping a Tributary Signal 3–111. . . . . . . . . . . . . . . . . . . . . . . . . . .

Setting the Test Pattern 3–113. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Unequipped Payload Mapping 3–114. . . . . . . . . . . . . . . . . . . . . . .

Checking Received Optical Power or Received Peak Voltage 3–114.