Filter
Top Products
CTS 710 SONET Test Set User Manual
I–1
Appendix I: Packing for Shipment
If you ship the CTS 710, pack it in the original shipping carton and
packing material. If the original packing material is not available,
package the instrument as follows:
1. Obtain a corrugated cardboard shipping carton with inside
dimensions at least 15 cm (6 in) taller, wider, and deeper than the
CTS 710. The shipping carton must be constructed of cardboard
with 170 kg (375 lb) test strength.
2. If you are shipping the CTS 710 to a Tektronix field office for
repair, attach a tag to the CTS 710 showing the instrument owner
and address, the name of the person to contact about the
instrument, the instrument type, and the serial number.
3. Wrap the CTS 710 with polyethylene sheeting or equivalent
material to protect the finish.
4. Cushion the CTS 710 in the shipping carton by tightly packing
dunnage or urethane foam on all sides between the carton and the
CTS 710. Allow 7.5 cm (3 in) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial
stapler.
CTS 710 SONET Test Set User Manual
I–1
Appendix I: Packing for Shipment
If you ship the CTS 710, pack it in the original shipping carton and
packing material. If the original packing material is not available,
package the instrument as follows:
1. Obtain a corrugated cardboard shipping carton with inside
dimensions at least 15 cm (6 in) taller, wider, and deeper than the
CTS 710. The shipping carton must be constructed of cardboard
with 170 kg (375 lb) test strength.
2. If you are shipping the CTS 710 to a Tektronix field office for
repair, attach a tag to the CTS 710 showing the instrument owner
and address, the name of the person to contact about the
instrument, the instrument type, and the serial number.
3. Wrap the CTS 710 with polyethylene sheeting or equivalent
material to protect the finish.
4. Cushion the CTS 710 in the shipping carton by tightly packing
dunnage or urethane foam on all sides between the carton and the
CTS 710. Allow 7.5 cm (3 in) on all sides, top, and bottom.
5. Seal the shipping carton with shipping tape or an industrial
stapler.